Suzuki UK110NE 2015, Owner'S Manual

Page: 91 / 144

6-31
12. Replace the drain plug and tighten it
securely with a torque wrench. Pour
fresh oil through the filler hole. Approxi-
mately 700 ml will be required.
Drain plug tightening torque:
35 N·m (3.6 kgf-m, 26.0 lbf-ft)
NOTE: About 650 ml of oil will be required
when changing oil only.
13. Tighten the oil filler cap.
14. Start the engine and allow it to idle for
three minutes.
15. Check the oil level according to Oil Level
Check procedure.
NOTE: Check to see that no oil is leaking
from the oil filter cover.
NOTICE
Engine damage may occur if you use oil
that does not meet Suzuki’s specifica-
tions.
Be sure to use the oil specified in the
FUEL AND ENGINE OIL RECOMMENDA-
TIONS section.