CLUTCH 5-9
• Fit the clutch cover
1
.
• Tighten the bolts to the specified torque.
$
Clutch cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
MAGNETO COVER
• Install the clutch release camshaft.
• Install the magneto rotor and stator. (
!
7-4)
• Install a new gasket.
• Tighten the bolts to the specified torque.
$
Magneto cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
INSPECTION AFTER INSTALLATION
• Pour transmission oil. (
!
2-9)
• Adjust the clutch cable play. (
!
2-13)
• Adjust the rear brake pedal height. (
!
2-20)
Summary of Contents for RM 250 2003
