background image

3-8

55KS0-74E

INSTRUMENT PANEL

55KS0-74E

Rear Fog Light Indicator Light 
(if equipped)

54G491

The rear fog light indicator light comes on
when the rear fog light operates.

Glow Plug Indicator Light
(if equipped) (For Diesel only)

60A543

If the coolant temperature is cool enough,
this light comes on when the ignition switch
is turned to the “ON” position, and goes out
when the glow plug is heated enough for
engine starting.

Water in Fuel Filter Warning Light 
(for Diesel only)

If this light comes on, and keeps on glow-
ing, get the water drained from the fuel fil-
ter.

Transmission Warning Light (if 
equipped)

81A262

This light comes on for several seconds
when the ignition switch is turned to the
“ON” position so you can check the light is
working. If this light comes on, there is the
problem with the transmission system. Ask
your SUZUKI dealer to have the system
inspected.

Transmission Selector 
Position Indicator (if 
equipped)

79J102

When the ignition switch is in the “ON”
position, the indicator shows the gear posi-
tion.

For details on how to use the transmission,
refer to “Using the Transmission” in the
“OPERATING YOUR VEHICLE” section.

Speedometer/Odometer/Trip meter: 8
Meter Illumination Control: 8

67

Summary of Contents for Maruti S-Cross

























































































































































































Reviews: