Suzuki Maruti S-Cross, Manual

Page: 139 / 184

8-14
55KS0-74E
INSPECTION AND MAINTENANCE
55KS0-74E
Gear Oil Change
Since special procedures, materials and
tools are required, it is recommended that
you trust this job to your MARUTI SU
Z UKI
authorized dealer.
Engine Coolant
(For Petrol Engine)
56KN049
(For Diesel Engine)
62J129
Selection of Coolant
To maintain optimum performance and
durability of your engine, use MARUTI
Genuine Coolant.
This type of coolant is best for your cooling
system as it:
• Helps maintain proper engine tempera-
ture.
• Gives proper protection against freezing
and boiling.
• Gives proper protection against corro-
sion and rust.
Failure to use the proper coolant can dam-
age your cooling system. Your MARUTI
SU
Z UKI authorized dealer can help you
select the proper coolant.
WARNING
After driving the vehicle, the gear oil
temperature may be high enough to
burn your skin. Wait until the oil filler
plug is cool enough to touch with
your bare hands before inspecting
transmission oil.
CAUTION
When tightening the plug, apply seal-
ing compound “Three Bond” 2310 or
equivalent to the plug threads to pre-
vent oil leakage.
CAUTION
To avoid damaging your cooling sys-
tem:
• Always use a high quality ethylene
glycol base non-silicate type cool-
ant diluted with distilled water at
the correct mixture concentration.
• Make sure that the proper mix is 30/
70 coolant to distilled water for Pet-
rol and 50/50 coolant to distilled
water for Diesel. Concentrations
greater than specified coolant to
distilled water will cause overheat-
ing conditions.
• Do not use straight coolant nor
plain water.
(Continued)
Engine Coolant: 1, 2
139