Suzuki Maruti S-Cross, Manual

Page: 150 / 184

8-25
INSPECTION AND MAINTENANCE
55KS0-74E
55KS0-74E
Tyre Rotation
5-tyre rotation
80JK040
To avoid uneven wear of your tyres and to
prolong their life, rotate the tyres as illus-
trated. Tyres should be rotated as men-
tioned in periodic maintenance schedule.
After rotation, adjust front and rear tyre
pressures to the specification listed on
your vehicle’s Tyre Information Label.
Wheel Balancing
If the vehicle vibrates abnormally on
smooth road, have the wheel balanced at
Maruti Suzuki Authorized Workshop.
Wheel Alignment
In case of abnormal tyre wear or pulling
towards one side, have the wheel aligned
at Maruti Suzuki Authorized Workshop.
Changing Wheels
55KS031
To change a wheel, use the following pro-
cedure:
1) Remove the jack, tools and spare wheel
from the vehicle.
2) Loosen, but do not remove the wheel
nuts.
3) Jack up the vehicle (follow the jacking
instructions in the “EMERGENCY SER-
VICE” section in this manual)
4) Remove the wheel nuts and wheel.
5) Before installing the new wheel, clean
any mud or dirt off from the surface of
the wheel and hub with a clean cloth.
Clean the hub carefully
; it may be hot-
from driving.
6) Install the new wheel and replace the
wheel nuts with their cone shaped end
facing the wheel. Tighten each nut
snugly by hand until the wheel is
securely seated on the hub.
7) Lower the jack and fully tighten the nuts
in a crisscross fashion with a wrench as
shown in the illustration.
WARNING
• Be sure to shift into “P” (Park) in
automatic transmission or “R”
(Reverse) in manual transmission
when you jack up the vehicle.
• Never jack up the vehicle with the
transmission in “N” (Neutral). Oth-
erwise, unstable jack may cause an
accident.
Battery: 9
Fuses: 7
150