Suzuki Maruti S-Cross Manual Download Page 161

Page: 161 / 184

8-36

55KS0-74E

INSPECTION AND MAINTENANCE

55KS0-74E

Spot light (if equipped)

79J131

Wiper Blades

54G129

If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.

To install new wiper blades, follow the pro-
cedures below.

NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult your
MARUTI SUZUKI dealer for proper
replacement method.

For windshield wipers:

70G119

1) Hold the wiper arm away from the win-

dow.

CAUTION

To avoid scratching or breaking the
window, do not let the wiper arm
strike the window while replacing the
wiper blade.

161

Summary of Contents for Maruti S-Cross

























































































































































































Search results

Summary of Contents for Maruti S-Cross

Reviews:

Related manuals for Maruti S-Cross

Brands by name

Popular brands

Suzuki Maruti S-Cross, Manual

Search results

Summary of Contents for Maruti S-Cross

Reviews:

Related manuals for Maruti S-Cross

Brands by name

Popular brands