manualshive.com logo in svg

Suzuki LT-Z400, Owner'S Manual

Share
Download
Suzuki LT-Z400 Owner'S Manual Download Page 78

5-23

Brake Fluid

Front

Rear

Be sure to check the brake fluid level
in the front and rear brake fluid reser-
voirs. Inspect for brake pad wear and
leaks.

WARNING

Brake fluid can be hazardous to
humans and pets.

Brake fluid is harmful or fatal if
swallowed, and harmful if it comes
in contact with your skin or eyes.

Keep brake fluid away from chil-
dren and pets. Call your doctor
immediately if brake fluid is swal-
lowed, and induce vomiting. Flush
eyes or skin with water if brake
fluid gets in eyes or comes in con-
tact with skin.

WARNING

Failure to use proper brake fluid
can be hazardous.

The use of any fluid except DOT4
brake fluid from a sealed con-
tainer can damage the brake sys-
tem and lead to an accident.

Use only DOT4 brake fluid from a
sealed container. Never use or mix
with different types of brake fluid.

WARNING

Failure to keep the brake fluid res-
ervoir full can be hazardous.

The brakes may not work correctly
without the proper amount of
brake fluid. This could lead to an
accident.

Inspect the brake fluid level before
each use. If there is frequent loss
of fluid, take your vehicle to a
SUZUKI dealer for inspection.

CAUTION

Spilled brake fluid can damage
your ATV.

Brake fluid can damage painted
surfaces and plastic parts.

Be careful not to spill any fluid
when filling the brake fluid reser-
voir. Wipe spilled fluid up immedi-
ately.

Summary of Contents for LT-Z400
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands