manualshive.com logo in svg

Suzuki LT-Z400, Owner'S Manual

Share
Download
Suzuki LT-Z400 Owner'S Manual Download Page 69

5-14

Washing the Element

Wash the element as follows:

1. Fill a wash pan larger than the ele-

ment with a non-flammable clean-
ing solvent 

A

. Dip the element in

the solvent and wash it.

2. Squeeze the element by pressing

it between the palms of both
hands to remove excess solvent.
Do not twist or wring the element,
or it will develop cracks.

3. Dry the element.
4. Put the element in a plastic bag.

Pour in some air filter oil 

B

 and

work the oil into the element.

5. Squeeze the element to remove

excess oil.

6. Clean any dirt or debris from

inside the air cleaner case. Be
sure no dirt enters the carburetor.

7. Reinstall the cleaned element in

reverse order of removal. Be sure
that the element is securely in
position and is properly sealed.

CAUTION

A torn air filter can damage your
ATV.

Dirt and dust may get inside the
engine if the element is torn.

Carefully examine the element for
tears before and after cleaning it.
Replace the element with a new
one if it is torn.

DRY

WARNING

Oil and solvent can be hazardous.

Children and pets can be harmed
from contact with oil and solvent.

Be sure to keep oil and solvent
away from children and pets. Dis-
pose of used oil and solvent prop-
erly.

CORRECT

INCORRECT

Summary of Contents for LT-Z400
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands