manualshive.com logo in svg

Suzuki LT-Z400, Owner'S Manual

Share
Download
Suzuki LT-Z400 Owner'S Manual Download Page 34

3-5

WHAT TO WEAR

A helmet is the most important piece
of gear you should wear. A helmet
can help prevent a serious head
injury. Choose a helmet that fits
snugly. Ask your dealer for help in
selecting a good quality helmet that
fits properly.

You should wear eye protection when
you ride. If a rock or branch hits you in
the eyes, you could be severely
injured. Wear goggles or a face
shield.

Wear proper clothing when you ride.
The proper clothes can help protect
you from injury. Wear a good pair of
gloves, strong boots that fit over the
ankle, long pants, and a long sleeve
shirt.

WARNING

Operating this ATV without wear-
ing an approved motorcycle hel-
met, eye protection and protective
clothing can be hazardous.

Operating without an approved
motorcycle helmet or eye protec-
tion increases your chances of a
severe head injury or death in the
event of an accident. Operating
without protective clothing
increases your chances of severe
injury in the event of an accident.

Always wear an approved motor-
cycle helmet that fits properly.
Always wear eye protection (gog-
gles or face shield). You should
also wear gloves, boots, long
sleeve shirt or jacket, and long
pants.

OK

Summary of Contents for LT-Z400
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands