manualshive.com logo in svg

Suzuki LT-Z400, Owner'S Manual

Share
Download
Suzuki LT-Z400 Owner'S Manual Download Page 66

5-11

6. Remove the three bolts holding

the filter cover 

3

 in place.

7. Remove the filter cover, pull out

the oil filter element 

4

 and

replace with a new one.

8. Before replacing the oil filter cover,

be sure to check that the filter
spring 

5

 and the “O” ring 

6

 are

installed correctly.

NOTE: Insert a new “O” ring each
time the filter element is replaced.

9. Reinstall the oil filter cover and

tighten the bolts securely, but do
not overtighten them.

10. Reinstall the drain plugs and

tighten them securely. Pour fresh
oil through the filler hole. Approxi-
mately 2100 ml (2.2/1.8 US/Imp.
qt) of oil will be required.

NOTE: Approximately 2000 ml (2.1/
1.8 US/Imp. qt) of oil will be required
when changing oil only without
replacing the oil filter.

CAUTION

Failure to use the correct oil filter
can damage your ATV.

Engine damage may occur if you
use oil filter with the wrong design
or thread specifications.

Be sure to use a genuine SUZUKI
oil filter or an equivalent filter
designed for your ATV.

CAUTION

Failure to insert the new oil filter
element correctly can damage the
engine. 

No  oil  flow  will  result  if  the  ele-
ment is inserted backwards.

Insert the open end of the new oil
filter element into the engine.

Summary of Contents for LT-Z400
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands