manualshive.com logo in svg

Suzuki LT-Z400, Owner'S Manual

Share
Download
Suzuki LT-Z400 Owner'S Manual Download Page 23

2-10

THROTTLE LIMITER

Use the throttle limiter to restrict max-
imum engine power by limiting throttle
lever travel. Adjust this limiter accord-
ing to the rider’s skill and experience.

To adjust the throttle limiter:
1. Loosen the lock nut 

1

.

2. Turn the throttle limiter screw 

2

clockwise to restrict maximum
engine power or counterclockwise
to increase the maximum engine
power.

3. Tighten the lock nut 

1

.

REAR BRAKE PEDAL

Pressing the rear brake pedal will
apply the rear brake.

FUEL VALVE

This vehicle is equipped with an auto-
matic type, diaphragm style fuel
valve. There are three positions:
“ON,” “RES” and “PRI.”

“ON” Position

The normal position for the fuel valve
lever is in the “ON” position. In this
position, no fuel will flow from the fuel
valve to the carburetor unless the
engine is running or being started.

“RES” (RESERVE) Position

If the fuel level in the tank is too low,
turn the lever to the “RES” position to
use the reserve fuel supply. In this
position, no fuel will flow from the fuel
valve to the carburetor unless the
engine is running or being started.
Reserve fuel supply: 2.7 L

FUEL

PRI

FUEL

PRI

Summary of Contents for LT-Z400
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands