7
FRONT/AVANT
ASSEMBLY
HANDLEBARS
Loosen the handlebar clamp bolts.
A: Handlebar clamp bolt
A: Handlebars
B: Clamp (Upper)
C: Clamp (Lower)
D: Flange bolt
E: Dot mark
Tighten the handlebar clamp bolts to the specified torque.
!
"
"
"
"
Handlebar clamp bolt: 23 N·m (2.3 kgf-m)
A: Flange bolt
C: Dot mark
B: Flange bolt
FRONT BRAKE MASTER CYLINDER
Remove the bolts and holder from the front brake
master cylinder.
A: Master cylinder
B: Bolt
C: Holder
NOTE:
Align the dot mark on the handlebars with the
mating surface of the front side of left clamp.
NOTE:
To install the handlebars correctly, first
tighten the bolt
A
A
A
A
of the front side with speci-
fied torque and then tighten the bolt
B
B
B
B
of the
rear side.
Make sure that the clamp has no clearance at
the front side as shown in the illustration.
