29
Install the CDI unit and fuse box to the battery holder.
Pass the strap through the hole of battery holder.
Clamp the
+
+
+
+
lead wire and wiring harness with strap.
A: Battery holder
B: CDI unit
C: Fuse box
D: Strap L:105 mm
Reinstall the seat. Insert the seat hook into the seat
hook retainer and pass the seat lock lever through
the hole of the rear fender.
Push the seat down firmly.
A: Seat assembly
B: Hook
C: Hook retainer
D: Seat lock lever
E: Hole
BRAKE FLUID
Keep the vehicle upright and place the handlebars
straight. Check the brake fluid level in the front mas-
ter cylinder reservoir. If the fluid level is below the
lower level indicated in the figure, add the correct
type of brake fluid. Refer to the chart below for the
proper selection.
!
A: Lower level line
Specification and Classification
DOT 4
Be careful not to spill any brake fluid on the
paint or plastic components as they will be
damaged.
