SERVICING INFORMATION 11-41
THROTTLE BODY
THER RA FAN + COOLANT
ELECTRICAL
Unit: mm (in)
ITEM
SPECIFICATION
ID No.
10GO
Bore size
32 mm
Fast idle r/min.
1 300 – 1600 r/min.
Idle r/min.
1 200 ± 100 r/min.
Synchronizing screw opening
1
³
turns out
IAC valve resistance
Approx. 4
Ω
at 20 – 24 °C (68 – 75 °F)
Throttle cable play
2.0 – 4.0 mm
(0.08 – 0.16 in)
ITEM
STANDARD/SPECIFICATION
LIMIT
Thermostat valve opening temper-
ature
Approx. 88 °C (190 °F)
—
Thermostat valve lift
Over 8.0 mm (0.3 in) at 100°C (212 °F)
—
Engine coolant temperature sensor
resistance
20 °C (68 °F)
Approx. 2.45 k
Ω
—
50 °C (122 °F)
Approx. 0.811 k
Ω
—
80 °C (176 °F)
Approx. 0.318 k
Ω
—
110 °C (230 °F)
Approx. 0.142 k
Ω
—
Radiator cap valve opening pres-
sure
110 kPa (1.1 kgf/cm²)
—
Eclectic fan thermo-switch operat-
ing temperature
ON
93 – 103 °C
—
OFF
87 – 97 °C
—
Engine coolant type
Use an anti-freeze/coolant compatible with alumi-
num radiator, mixed with distilled water only, at the
ratio of 50:50.
—
Engine coolant including reserve
Reverse tank
side
Approx. 250 ml
—
Engine side
Approx. 1 050 ml
—
ITEM
STD/SPEC.
NOTE
Firing order
1·2
Spark plug
Type
NGK: CR8E
DENSO: U24ESR-N
Gap
0.7 – 0.8
(0.028 – 0.031)
Spark performance
Over 8.0 mm (0.3) at 1 atm.
CKP sensor peak voltage
More than 2.0 V
+
: Bl,
-
:G
Ignition coil resistance
Primary
0.8 – 2.5
Ω
Secondary
8 – 18 k
Ω
Ignition coil primary peak voltage
More than 80 V
#1
+
: W/Bl,
-
: Ground
#2
+
: B/Y,
-
: Ground
Generator coil resistance
CKP sensor
150 – 300
Ω
G – BI
Charging
0.1 – 1.0
Ω
Y – Y
Summary of Contents for AN650 2002
