9-64 CHASSIS
BRAKE PAD REPLACEMENT
• Remove the plug
1
.
• Remove the pad mounting pin
2
.
• Remove the pads
3
.
• Inspect the pad mounting pin for wear. If excessive wear is
found, replace the mounting pin with a new one.
• Assemble the new brake pad
4
, insulator
5
and shim
6
.
NOTE:
The pad fitted shim and insulator must be installed at piston
side.
• Install the brake pads.
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
Summary of Contents for AN650 2002
