TRIO MP-245A FOUR-AXIS MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 3.12B (20191001)
9
1.
INTRODUCTION
1.1
Structure of the TRIO MP-245A Documentation Package
The TRIO MP-245A 3-Axis Micromanipulator System is comprised of a ROE/controller, a
power adapter, and a TRIO MP-245/M stepper-motor-based electromechanical
micromanipulator. This manual consists of four parts: This chapter, Introduction, which
provides an overview and general description of the TRIO MP-245A system; Chapter 2,
Installation, which describes how to install, set up, and configure all components of the
system; Chapter 3, Operations, which describes how to operate the TRIO MP-245A; Chapter
4, Maintenance, describes how to perform routine and other maintenance; and Chapter 5,
Reconfiguration, describes the reconfiguration possibilities of the TRIO MP-245A system.
Figure 1-1. The TRIO MP-245A system
1.2
Components of the TRIO MP-245A System
Carefully remove all components from the shipping container. In addition to this manual, the
following should be included:
TRIO MP-245/M
ELECTROMECHANICAL
MICROMANIPULATOR
TRIO MP-245/E
ROE/CONTROLLER
Summary of Contents for TRIO MP-245A
Page 3: ......
Page 4: ......
Page 52: ...50 TRIO MP 245A MICROMANIPULATOR SYSTEM QUICK REFERENCE REV 3 12B 20191001 FW V3 12 NOTES...
