Sutter Instrument TRIO MP-245A, Operation Manual

Page: 49 / 52

TRIO MP-245A FOUR-AXIS MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 3.12B (20191001)
47
INDEX
[
[SPEED]/LOCK button ....................................... 25
A
accessories ............................................................. 42
C
cleaning .................................................................. 39
configuration ......................................................... 45
Configuration ........................................................ 15
Configuration switches ........................................ 16
Controls
TRIO MP-245A ................................................. 15
Power switch ................................................. 15
D
disclaimer ................................................................. 3
E
Electrical Connections ......................................... 14
external control
Move to specified ............................................... 31
external control
axis position command parameters ................ 28
command sequence formatting ....................... 28
microsteps and microns (micrometers) .......... 29
protocol and handshaking................................ 27
Virtual COM Port (VCP) serial port settings 27
external control
Move in straight line to specified position at
specified speed (‘S’) command ..................... 31
external control
Interrupt straight-line move (‘^C’) command
........................................................................ 32
external control
Move to specified X-axis position command ... 33
external control
Move to specified Y-axis position command ... 33
external control
Move to specified Z-axis position command ... 33
external control
Setting the angle (‘A’) command..................... 34
external control
Recalibrate (‘R’) command .............................. 34
external control
notes ................................................................... 34
external control
task-complete indicator .................................... 34
external control
intercommand delay ......................................... 34
external control
clearing send/receive buffers ........................... 35
external control
positions in microsteps ..................................... 35
external control
ranges and bounds ............................................ 35
external control
absolute positioning system origin .................. 35
external control
absolute vs. relative positioning ...................... 35
external control
position value typing ........................................ 35
external control
position value bit ordering ............................... 35
external control
travel lengths and durations............................ 36
external control
movement speeds .............................................. 36
external control
move interruption ............................................. 36
external control
angle setting & movement ............................... 37
external control
Virtual COM Port (VCP) serial port settings 46
external control
protocol and handshaking................................ 46
external control
axis position command parameters ................ 46
external control
microsteps and microns (micrometers) .......... 47
external control
task-complete indicator .................................... 49
external control
intercommand delay ......................................... 49
external control
clearing send/receive buffers ........................... 49
external control
positions in microsteps ..................................... 49
external control
ranges and bounds ............................................ 49
external control
absolute positioning system origin .................. 49
external control
absolute vs. relative positioning ...................... 49
external control
position value typing ........................................ 49
external control
position value bit ordering ............................... 49
external control