Sutter Instrument MP-285, Basic Operations

Page: 28 / 40

MP-285 SYSTEM ROE BASIC OPERATIONS – REV. 4.04 (20210122)
18

Mark your pipette puller in such a way as to make pipettes of approximately the same
length.

Try to fabricate concentric pipettes.

Try to install your pipettes in the holder such that they always extend the same amount.

If you use a rotating device to position the manipulator, try to install it such that rotation
is up against a hard stop when the manipulator is in the operating location.
Note that you accepted the factory set speed and resolution for the move back to home. If you
wish, you can define both; for example, you can make the move to home even faster. Details
on how to specify speed and resolution are given in the
MP-285 Reference Manual
.