Sutter Instrument Lambda 721, Operation Manual

Page: 52 / 62

LAMBDA 721 OPERATION MANUAL – REV. 1.10C (20210517)
40
Command Tx/-
Delay/-
Rx
Ver. Total
Bytes
Byte
Offset
(Len.)
Value Alt-
key-
pad #
Ctrl-
char
ASCII
def./-
char.
Description
Dec. Hex. Binary
20
(5)
83 53 0101 0011 S
“SA-VS”
(Shutter A is not connected or is a
standard shutter (not a
SmartShutter))
65 41 0100 0001 A
45 2D 0010 1101 -
86 56 0101 0110 V
83 53 0101 0011 S
25
(5)
83 53 0101 0011 S
“SB-VS”
(Shutter B is not connected or is a
standard shutter (not a
SmartShutter))
66 42 0100 0010 B
45 2D 0010 1101 -
86 56 0101 0110 V
83 53 0101 0011 S
30 13 0D 0000 1101 <CR>
Completion indicator
Get Lambda
10-3
Compatible
Status (see
note)
Tx
1.26+ 1 0 204 CC 1100 1100 0204
Returns a Lambda 10-3
compatible data block containing
filter wheel and shutter status
information. (See note.)
Rx 1.26+ 13 0 204 CC 1100 1100
Command echo
1 16 10 0001 0000
Wheel A, Speed 1, Pos. 0
2 138 8A 1000 1010
Wheel B, Speed 0, Pos. 10
3
(2)
252 FC 1111 1100
Wheel C prefix byte
10 0A 0000 1010
Wheel C, Speed 0, Pos. 10
5 172 AC 1010 1100
Shutter A closed
6 188 BC 1011 1100
Shutter B closed
7
(2)
219 DB 1101 1011
Shutter A mode: N/A
1 01 0000 0001
Shutter A designator
9
(2)
219 DB 1101 1011
Shutter B mode: N/A
2 02 0000 0010
Shutter B designator
11 13 0D 0000 1101 <CR>
Completion indicator
12 13 0D 0000 1101 <CR>
Completion indicator
NOTE: The “Get Lambda 10-3 Compatible Controller Type and Configuration” and “Get Lambda 10-3 Compatible
Status” commands are provided to allow external-control software originally written for the Lambda 10-3 to control a
Lambda 721 while identifying itself as a Lambda 10-3. All data returned is static (i.e., data remains unchanged regardless
of all Lambda 721 states). These two commands are functional only if DIP Switch 2 is OFF (up).