Sutter Instrument Lambda 721, Operation Manual

Page: 53 / 62

LAMBDA 721 OPERATION MANUAL – REV. 1.10C (20210517)
41
Table
E-4
. Lambda 10 Series compatible LED selection commands.
Command Tx/-
Delay/-
Rx
Ver. Total
Bytes
Byte
Offset
(Len.)
Value Alt-
key-
pad #
Ctrl-
code
ASCII
def./-
char.
Description
Dec. Hex. Binary
All LEDs Off
Tx All 1 0
0 00 00000000
0000 ^@ <NUL>
Turn all LEDs off.
Rx All 2 0
0 00 00000000
^@ <NUL>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
LED 1 On
Tx All 1 0 1 01 00000001
0001 ^A <SOH> Turn LED 1 on
Rx All 2 0 1 01 00000001
^A <SOH>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
LED 2 On
Tx All 1 0
2 02 00000010
0002 ^B <STX>
Turn LED 2 on
Rx All 2 0 2 02 00000010
^B <STX>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
LED 3 On
Tx All 1 0 3 03 00000011
0003 ^C <ETX> Turn LED 3 on
Rx
All 2 0 3 03 00000011
^C <ETX>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
LED 4 On
Tx All 1 0 4 04 00000100
0004 ^D <EOT>
Turn LED 4 on
Rx All 2 0 4 04 00000100
^D <EOT>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
LED 5 On
Tx
All 1 0 5 05 00000101
0005 ^E <ENQ>
Turn LED 5 on
Rx
All 2 0 5 05 00000101
^E <ENQ>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
LED 6 On
Tx All 1 0 6 06 00000110
0006 ^F <ACK>
Turn LED 6 on
Rx All 2 0 6 06 00000110
^F <ACK>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
LED 7 On
Tx
All 1 0 7 07 00000111
0007 ^G <BEL>
Turn LED 7 on
Rx
All 2 0 7 07 00000111
^G <BEL>
Command echo
1 13 0D 0000 1101 ^M <CR>
Completion indicator
NOTE: All Lambda 10 Mode commands for the Lambda 721 correspond to the Lambda 10 series filter wheel movement
for Wheel A, Speed 0, Positions 1 – 7. Any other wheel-select, speed settings, and positions 8 – 9 are not supported.
Values 1 through 7 correspond to LEDs 1 – 7. Value 0, used to turn all LEDs off, can be used as the equivalent of closing
Shutter A.