UPG +
Initiates a system software
upgrade
. It needs to be followed by the YModem
transfer of an .upg file specific to the product. Both the main application and the
bootloader are upgraded this way (but each needs its own .upg file). Check
www.sutron.com
for software upgrades.
VER +
Shows the current software version, including build date and time and the
bootloader version.
WIZARD
Guides the user through station set up. Typing M1 WIZARD will do the setup
just for measurement one.
List of setup variables
The setup variables are fully detailed in section
Other Setup
.
STATION NAME
RECORDING
AUTO OUTPUT
GARMIN GPS
GPS LOCAL TIME OFFSET
List of measurement setup variables
The listed variables are preceded with M1 indicating they are settings for the first
measurement. If they were preceded with M2, they would reference the second
measurement. M16 is the last measurement. For full details on what the variables do,
please see section
Measurement setup
.
M1 ACTIVE
M1 LABEL
M1 MEAS TYPE
M1 WIND TYPE
M1 WIND AVERAGING
M1 SOIL TYPE
M1 SDI-12 ADDRESS
M1 SDI-12 COMMAND
M1 SDI-12 PARAM
M1 DIGITAL TYPE
M1 ANALOG TYPE
M1 INPUT RANGE
M1 WARMUP
M1 META INDEX
M1 MEAS INTERVAL
M1 MEAS TIME
M1 AVERAGING TIME
M1 SAMPLING INTERVA
M1 SUBSAMPLES
M1 SLOPE
M1 OFFSET
56
