Surveon CAM1300, User Manual

Page: 67 / 106

67

Name - Specifies the name of the Event.

Set Time Interval (When Activated) - The trigger time of the event
(00:00 to 23:59).
Enable Triggering By
The next step is to specify the frequency of trigger response. 3 options are
available:

Always - The default setting; Triggers event when conditions are met.

Recurrence Pattern - Enables triggering only if conditions are met
during a specified time period. To specify the period, select the days
of the week that the trigger is active by checking the corresponding
boxes, and fill in a start time and end time for motion detection in
the From: and To: boxes.

Never – The event is never triggered.
When Triggered
The actions to take when trigger conditions are met are configured here.
The following options are available:

Streams – Selects the stream from which the snapshot or recording
will be obtained.

Email – E-mails notifications to the email address specified in the
Event Server settings. If this option is chosen, fill in the following:
o
Subject - The subject line of the notification e-mail.