Surveon CAM1300, User Manual

Page: 44 / 106

44
Network
The network settings, including network configuration, port configuration,
and universal plug and play (UPnP) settings are used to configure camera
connectivity. These settings are found under the Settings > Network context.
Network Configuration
These settings are used to configure basic network access for the camera.
They are found under Network> Network Configuration .
Most of these settings vary with your specific hardware setup; therefore the
defaults are set for common SOHO level usage. If you are using the camera in
an enterprise environment, please check with your IT department to
determine the correct settings for this section.
IP & DNS Settings
These settings are used determine the IP address of the network camera.

Get IP address automatically
-
Automatically acquires IP address from
a DHCP service. This is the default setting .