Surveon CAM1300, User Manual

Page: 53 / 106

53

Frequency - The user can choose to compensate for 50Hz or 60Hz
lighting.

Denoise – Removes video noises.

Max Shutter Speed - Longer shutter times allow more light into the
sensor, resulting in a cleaner picture, however longer shutter times
can result in motion blur. The user may choose the following shutter
speeds: 1/2s, 1/5s, 1/7.5, 1/15s, 1/30s, 1/60s, 1/120s, 1/250s,
1/500s, 1/1000s and 1/10000s.

AGC Gain - Automatic gain control (AGC) adjusts the video gain level
to a variety of inputs. This setting provides a baseline value for the
AGC. Values higher than this will be darkened, and values that are
lower will be brightened. AGC should be adjusted so that the area of
interest is best lit.

White Balance - This setting allows users to choose the color
balancing method used.
o
AWB - Automatically chooses white level.
o
MWB - The user must specify the red and blue gain levels to
achieve the correct white level.

R Gain - The gain applied to the red video channel.
 B Gain - The gain applied to the blue video channel.

Day/Night Mode - Sets the day (color) and night (black and white, IR
cut filter off where applicable.) Night mode sacrifices color
information to produce a clear picture with less light.
o
Auto – The camera will automatically choose between
day/night mode.
 Night Threshold – Once selected, the camera will switch to
night mode. Set the value in 0~255.

Day Threshold - Once selected, the camera will switch to
day mode. Set the value in 0~255.
o
Day mode - Forces day mode.
o
Night mode - Forces night mode.
o
Schedule for day mode - Allows the user to set a time for
day/night transitions.