Surveon CAM1200, User Manual

Page: 87 / 129

87

Record - Records video to the server specified in the Event Server
settings and the microSD card when triggered. The video clip stored
on both remote storage server and local storage is a video file 35
seconds in length (5 seconds before and 30 seconds after the trigger)

Trigger DO –A Digital output signal is sent when triggered.
o
Trigger Duration - The length of time that the DO signal is
sent. Options are 1, 2, 5, 10, 20 or 30 seconds. For more
information please refer to the section on DI & DO .
Click OK to save or Cancel to abort the changes before you leave the page.
Adding/Editing a Scheduled Rule
The Add and Edit screens contain the following actions:
Note: If editing a rule that has not been triggered, the rule will not be
triggered after until after editing is complete. If the rule is triggered,
any changes will not be applied until the current trigger is resolved.
General
The following general fields should be filled in:

Name - Specifies the name of the Event.

Set Time Interval (When Activated) - The trigger time of the event
(00:00 to 23:59).
Enable Triggering By
The next step is to specify the frequency of trigger response. 3 options are
available:

Always - The default setting; Triggers event when conditions are met.