Surveon CAM1200, User Manual

Page: 58 / 129

58
UpnP
Universal plug and play (UPnP) is a protocol that simplifies the
implementation of networks by allowing new hardware to connect seamlessly
to a network. The settings for this feature can be found under Network >
UPnP .
To enable UPnP, first check the Enable UPnP box. If you wish to change the
default values, there are two fields that can be edited.

Friendly Name - An identifier for the camera on the network.

Interval - The time between camera-sent UPnP updates.
Click OK to activate UPnP or Cancel to abort the changes before you leave
the page. Once activated, the camera will be visible to other devices on the
network.
Note: If the computer does not have UPnP installed, you can add it by going
to Start > Control Panel > Add or Remove Programs . In the Add or
Remove Programs page, select Add/Remove Windows Components >
Networking Services and click Details . Select UPnP from the popup
window, and OK out to install UPnP services.