Surveon CAM12 Series, User Manual, Page: 82 / 146

82

Saturation - Adjusts the saturation of the image.

Sharpness - Adjusts the sharpness of the image.

AGC - Automatic gain control (AGC) adjusts the video gain level to a
variety of inputs. This setting provides a baseline value for the AGC.
Values higher than this will be darkened, and values that are lower
will be brightened. AGC should be adjusted so that the area of
interest is best lit.

Exposure Mode – Sets how the camera captures images. Longer shutter
times allow more light into the sensor, resulting in a cleaner picture,
however longer shutter times can result in motion blur.
o
Fixed - The shutter speed is fixed as the value you have selected:
1/1, 1/5, 1/10, 1/15, 1/25, 1/50, 1/100, 1/150, 1/180, 1/210,
1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000.
o
Auto –The camera will automatically change the shutter speed and
gain balance between image quality and frame rate when there is
insufficient light to preserve both. The maximum and minimum
shutter speed can be adjusted.
 Max Shutter Speed - Longer shutter times allow more light
into the sensor, resulting in a cleaner picture, however
longer shutter times can result in motion blur. The user may
choose the following shutter speeds: 1/1, 1/5, 1/10, 1/15,
1/25, 1/50, 1/100, 1/150, 1/180, 1/210, 1/250, 1/500,
1/1000, 1/2000, 1/5000.
 Min Shutter Speed - Minimum shutter times allow less light
into the sensor; however shorter times can result in darker
images. The user may choose the following shutter speeds:
1/1, 1/5, 1/10, 1/15, 1/25, 1/50, 1/100, 1/150, 1/180,
1/210, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000.
 WDR – When activated, the camera will attempt to preserve detail at
contrast extremes.
o
OFF – Inactivate this functionality.
o
DWDR - Specifies if the wide dynamic range (WDR) function
is activated. If activated, the WDR function will attempt to