Surveon CAM12 Series, User Manual, Page: 78 / 146

78

Max Shutter Speed - Longer shutter times allow more light into the
sensor, resulting in a cleaner picture, however longer shutter times
can result in motion blur. The user may choose the following shutter
speeds: 1/2s, 1/5s, 1/7.5, 1/15s, 1/30s, 1/60s, 1/120s, 1/250s,
1/500s, 1/1000s and 1/10000s.

Min Shutter Speed - Minimum shutter times allow less light into the
sensor; however shorter times can result in darker images. The user
may choose the following shutter speeds: 1/30s, 1/60s, 1/120s,
1/250s, 1/500s, 1/750s, 1/1000s, 1/1500s, 1/2000s, 1/10000s,
1/50000s.

AGC Gain - Automatic gain control (AGC) adjusts the video gain level
to a variety of inputs. This setting provides a baseline value for the
AGC. Values higher than this will be darkened, and values that are
lower will be brightened. AGC should be adjusted so that the area of
interest is best lit.

Dead Pixel Correction – Correct the dead pixels.

Day/Night Mode - Sets the day (color) and night (black and white, IR
cut filter off where applicable.) Night mode sacrifices color
information to produce a clear picture with less light.
o
Auto – The camera will automatically choose between
day/night mode.
 Sensitivity
 Delay Time
o
Day mode - Forces day mode.

Chroma Suppress - Reduces the false color phenomena.
o
Night mode – Forces night mode.
o
Schedule for day mode - Allows the user to set a time for
day/night transitions.
 From: - The time, in hours and minutes, when the camera
will be in day mode.

To: - The time, in hours and minutes, when the camera
will switch to night mode.
Click OK to save or Cancel to abort the changes before you leave the page.