Surveon CAM12 Series, User Manual, Page: 31 / 146

31
Status
LED
(rear)
Green
Shows steady green for normal operation, flashing
when the camera is accessed.
Note: The Status LED can be configured to be unlit.
Amber
Steady during startup, reset to factory default or
when restoring settings.
Flashes every 0.2 sec during firmware upgrade.
(On:0.2 sec, Off: 0.2 sec)
Note: Startup or reboot may have failed if the status LED shows
steady amber for over 1 minute.
Unlit No network connection.
3. Reset Button
Pressing the reset button will restore the camera to its factory
default settings, as described in Resetting to the Factory Default
Settings.
Note: Camera resets can also be performed under System > Reset To Factory
Default on the web interface .
4. USB Connector
The USB Connector can be connected to a wireless USB adapter to
access wireless LAN.
Note: (1)Only EDIMAX‘s wireless adapters - EW-7711UAn, EW-7711USn and
EW-7711UMn are supported. The recommended wireless APs are
EdiMax BR-6424n/BR-6324nL/BR-6225n.
5. Network Connector
The camera connects to the network via a standard RJ-45 network
connector. The camera detects the speed of the local network
(10/100BaseT). The camera also supports PoE (Power-over-Ethernet),
and can be powered directly through the network cable.
6. Power Connector
The power connector is provided for solutions without PoE.