UNPACKING THE DEHUMIDIFIER
Disassemble the carton, but leave the unit attached to the pallet for installing the unit with a forklift or scissors lift�
INCLUDED IN THE CARTON
• Dehumidifier
• Installation manual
• Model S77 control
• 3/4" P-Trap
• 3/4" MNPT x 3/4" female pipe
• 3/4" x 3/4" x 3/4" T-fitting
• Terminal screwdriver
• 30 feet of thermostat cable
• MERV 11 filter
ELECTRICAL SERVICE PANEL
INLET SIDE
18" RECOMMENDED
18" MINIMUM
FIGURE 2
– SPACE CLEARANCES
LOCATION CONSIDERATIONS
This appliance is not to be accessible to the general public� The
dehumidifiers should be spaced evenly throughout the area to be
dehumidified with the following recommendations:
1.
Avoid placement where the discharge of one dehumidifier is
pointing toward the inlet of another�
2.
Avoid locating the dehumidifier inlet too near a supply register�
Space is not usually available to totally avoid this, but minimizing
the amount of cold air that is discharged to the dehumidifier inlet
will improve moisture removal performance of the dehumidifier�
3.
Account for handling dehumidifier condensate by considering drain
or sump pump locations�
4.
Leave 18" minimum clearance for access to the user interface,
electrical panel for service and filter for maintenance�
4
English
