18
The following operations are prohibited:
Insert into the front side of the PCB
Insert
crosswise
into the PCB
Insert
crosswise
into the PCB
It will be a 2~5mm gap.
Unfold the anti-skidding clip about 20
degrees on both sides.
Place the anti-skidding clip onto the assembly end of the light.
Pay attention to its direction
Fit the anti-skidding clip to the end of the light so that it wraps
tightly and its brim is aligned with the cut edge on both sides.
3.3 Inserting the Feed Connector
3.4 Treatment of Anti-skidding Clip
3.5 Installation of Anti-Skidding Clip
USER MANUAL
www.surelight.com
W
=2~5mm
