Instructions
for
light
cutting
08
Th
e M
in. c
utt
ing l
en
gth
(se
e a
s th
e fe
atu
re)
Cu
ttin
g
line
Don't cut slantingly
Note:
1
.
Place the light horizontally when cutting it.
2
.
Use only factory-recommended cutter.
3
.
Cut the light according to the following instructions.
Incorrect operation will damage the light
USER MANUAL
www.surelight.com
Cutting
line
02
01
02
02
Cut the light only at printed cutting line with
printing mark face upwards
The cutting surface must be flush
and smooth.
Printing mark should be faced
upwards
Cutting can only be made at the
printed cutting line
01
02
01
02
Cutting
line
01
Cutting Line
Printing Mark
Please use a smooth and sharp cutter for cutting when the dedicated cutter is not
available, any rusty or jagged cutter is prohibited.
Note: Waterproof may not achieved with the following situations.
