PCB
Insertion Placement
PVC Tape
10
USER MANUAL
www.surelight.com
3.Installation Steps
3.1
Inducing
a Cavity for Feed Connector
Insert the inducer to the backside of PCB around 10~12mm,
move the inducer up and down 3~5 times gently to create a
small cavity.
3.2 Insert the Feed Connector
Insert the inducer into the backside of PCB
It
will damage the light if insert into front
side of PCB
Insert the feed connector pins into the
cavity that you created with the
inducer (backside of PCB)
The following operations are prohibited:
Insert into the front side of the PCB
Insert
crosswise
into the PCB
Insert
crosswise
into the PCB
NEVER insert into the front side
(LED side) of the PCB
