396
-
3815Y1 SureFire PumpRight for Raven RCM
7
Revised 12/04/2019
The RCM has the ability to show fertilizer system pressure on the display. The pressure
sensor is most often mounted on electric section valves when used in PumpRight systems.
The pressure sensor is a 100 psi, 0
-
5 v, 3
-
wire type sensor for compatibility with the RCM. The sensor has a
1/4”
MPT fitting.
The user can select to display the pressure on the in
-
cab display. The pressure sensor is very helpful to
optimize system performance and troubleshoot any issues. Pressure alarms or limits can be set on the
display in the cab.
Pressure Sensor
3 Wire Sensor with
2”
Manifold x
1/4”
MPT Fitting
Item Number 520
-
00
-
055100
B
Components
Liquid
Pressure Sensor (3 wire
type) with harness
521
-
05
-
050150
2”
Plug with
1/4”
gauge port
105
-
200PLG025
Pressure Sensor Hose Tap Kits
When electric section valves or LiquiShift is
not
used in the fertilizer system, the best location to install the
pressure sensor is in the hose after it leaves the flowmeter. To use these kits, order the correct kit for your
hose size. Then also order the kit above that includes the
2”
Manifold x
1/4”
MPT fitting.
3/4”
Hose Pressure Tap
520
-
00
-
055800
1”
Hose Pressure Tap
520
-
00
-
055850
1 1/2”
Hose Pressure Tap
520
-
00
-
055900
RCM Setup:
Pressure Sensor Type: Custom
Pressure Calibration: 50 mv/psi
1”
Plug with
1/4”
gauge port
105
-
100PLG025
Pressure Sensor for
LiquiShift is mounted at the
base of the valve stack.
The same sensor is used for
LiquiShift and displayed on
the display.
SureFire
Ag
Systems