SUR-RON STORM BEE E 2022, Owner'S Manual, Page: 21 / 48

7.5 7.6
____________ w
arning
____________
The ABS anti-lock braking system maximizes the
braking efficiency in emergency situations and the
safety during riding. Under certain conditions, ABS can
shorten the braking distance, but it cannot replace good
riding habits.
____________ w
arning
____________
Please ride safely and respect the legal speed limit on
the road.
and not released within 5s, the ABS ON/OFF switch
request will be ignored and the ABS keeps the
current state；When the ABS switch is pressed for
more than 30s, the ECU of the ABS regards the switch
signal as a fault signal, and the ABS returns to
default ON state. The ABS can only be turned OFF
after the power is switched on again.
Disable ABS
1. In the parking state, put down the sidestand
2. Place the motor stop switch in the OFF position
3. Turn the key switch to the ON position
4. Press and hold the ABS switch for 3 seconds and
then release, the rear wheels ABS function is now
turned off, and the ABS indicator light flashes at a
frequency of 0.2 second; Then press and hold the
ABS switch again for 3 seconds and release it, and
the ABS function will switch back to ON state; press
and hold the ABS switch again for 3 seconds, now all
ABS functions are turned OFF, and the ABS warning
light flashes at a frequency of 1.2 second。
ABS indicator
1、When the ABS system detects a fault, the ABS fault
indicator will light up. If the fault is eliminated, the
ABS warning light will disappear when the
motorcycle speed reaches 5km/h in the current states
or turn ON the key switch and reaches the speed of
5km/h next time；
2、When the ABS is in the ON mode and the speed of
your electric motorcycle reaches 5km/h, the ABS
indicator light goes out，
3、When the ABS is in the off mode, the ABS warning
light flashes at a frequency of 1.2 time/sec；
4、When the ABS switch is pressed, the ABS warning
light flashes at a frequency of 1.2 times/sec, but
when the ABS switch is pressed for more than 30s,
the ABS warning light is always on；
5、 When the ABS is in the diagnosis mode, the ABS
warning light is on
and the braking distance may increase
____________ Caution ____________
When the ABS system is disabled, the ABS indicator will
continue to flash (1.2 second a time).
Starting and Operating Starting and Operating
____________ w
arning
____________
Ride cautiously when turning. If you braking while
turning, ABS may not be able to offset the centrifugal
force of inertia. Such activities will cause unsafe riding
and easily cause accidents. Certain riding conditions
and environments may reduce the braking efficiency of
ABS and make its braking distance equal to that of a
motorcycle without ABS.
____________ w
arning
____________
When ABS is disabled, the electric motorcycle will be
able to operate as a motorcycle without ABS function,
you the Storm electric motorcycle is about to enter
the temperature protection mode. To prevent the
motorcycle from forced reducing its power, you can
choose to slow down and riding smoothly or switch
to ECO mode until the indicator light stops flashing.
Phase 2 、 If the temperature continues to rise, the
orange system warning indicator ' A ' above the
dashboard will stay on to inform you that the electric
motorcycle is now enter a temperature protection
strategy, and the power of the Storm Bee electric
motorcycle will be reduced accordingly.
ABS（Anti-lock braking system）
1 、 ABS Switching ON/OFF conditions
① The whole motorcycle is powered on
② The speed of the front and rear wheels of the
motorcycle is zero
③ The electric motorcycle is in non-diagnostic mode
2 、 ABS operation method
① After turn the Key switched ON, ABS is turned on
by default
② When the ABS is in the OFF condition, the ABS
indicator flashes at a frequency of 1.2 second, when
the ABS is in the ON condition, the ABS indicator is
off
③ When the ABS switch is pressed for more than 3s