SUR-RON STORM BEE E 2022, Owner'S Manual, Page: 17 / 48

6.3
B
A
6.4
on the dashboard will stay on. Press the Turbo mode
switch and the Turbo mode is triggered, and the
Turbo mode indicator on the dashboard will flashing
slowly. When Turbo mode activated for a certain
period of time (about 10 seconds), the Turbo mode
indicator will flash rapidly, and the MCU will
automatically exit Turbo mode after another 10
seconds, then the Turbo mode indicator goes out,
and back to normal operation condition. It will take
about another 10 seconds to reboot, and re-use the
Turbo mode again.
H. ABS Switch
For operations and instructions, see " Starting and
Operating" page 7.6.
I. motor stop switch
When the top ' A ' of the
switch is pressed, it will
cut off the power supply
for operation signal. The MCU remains in the state of
no power output until the bottom
' B ' of the switch is
pressed. The switch does not close all operation
electrical circuits, only the operating of the motor.
J. Riding mode button
For instructions and operations, please refer to page
6.4 of "Feature Introduction".
K. Reverse mode\Switch setting button R\S
For instructions and operations of the function
setting, please refer to page 5.1 of "Function
Setting".Reverse mode: When the throttle is in idle
position and the electric motorcycle speed is 0km/h,
press and hold the R/S function key and do not
release it. The reverse indicator R on the dashboard
will light up, and the electric motorcycle will enter
the reverse mode. Twist the throttle and the
motorcycle starts to reverse; once it enters the
reverse mode, releasing the R/S button will instantly
cut off the power. Only when the R/S button is
released and the throttle is reset to zero will the
reverse mode be exited and the forward gear mode
will be functionally again.
L. Throttle control
Rotate the thottle handle counterclockwise to
accelerate the motorcycle.
When the electric motorcycle is in the riding state,
the kinetic energy regenerative system (KERS) will be
activated when the ebrake is suddenly activated or
the throttle position is back to idle. KERS will
generate electric energy from the riding motorcycle
Feature Introduction Feature Introduction
B A C
then stored in the battery pack, thereby helping to
improve energy efficiency and increase the range. A
slight resistance is felt when KERS is activated. The
KERS level can be changed in the System Feature
Mode, see page 5.4 for details.
M. Front brake handle
When you pull the handle backwards, it controls the
front braking system. When braking, the acceleration
handle should be in the idle position. The brake
lights are also lit.
Riding mode button
The Riding mode buttons include sports mode ' A ' ,
rain mode ' B ' and ECO mode ' C ' . You can switch
between Riding mode while riding.
1. Sports mode ' A '
This mode has strongest power output and
acceleration ability. It is highly recommended that
users only use this mode after familiarizing
themselves with the motorcycle.
2. Rain mode ' B '
In this mode, the power is reduced, and the ASR
function is turned on and stay on by default, which
can effectively prevent the motorcycle from slipping.
3. ECO mode ' C '
In this mode, the power and acceleration ability are
much reduced, the electric motorcycle is much easier
to ride and maximized the cruise range.