14
NOTE:
After removing limescale, test on an isolated area to ensure that all debris has been
removed from the unit before resuming use.
CAUTION:
DO NOT LEAVE THE STEAMER UNATTENDED DURING LIMESCALE REMOVAL AND/OR WHILE
IN USE.
Cleaning Steamer Attachments that are Blocked:
If you live in an area that has a high mineral content in the tap water you may notice that less
steam comes out from certain accessories. This could be caused by mineral buildup inside the
accessory nozzle tips. To clean, first detach the Hand-Held Steamer from the Mop Body as per
the previous instructions. Make sure that the unit is not plugged in. Fill the water tank with a
1/3 vinegar - 2/3 water solution and attach each affected accessory to the unit one at a time.
Plug unit in and wait for the green Ready To Use indicator light (20) to come on. Press the
ON/OFF Switch (19) (once only - Hand-Held Steamer will emit continuous steam until switch is
pressed again to turn unit off). Flush the vinegar/water solution through the attachment(s)
continuously to remove deposits. Once the steam is emitted smoothly press the ON/OFF Switch
again to turn unit off.
CAUTION:
It is preferable to perform these cleaning procedures in a well ventilated and protected
area.
