8
• The Green Indicator Light (20) will go on and off during use. This is a normal function which
happens as the heater heats up or has reached its optimal temperature. This will not affect
cleaning performance and you can continue cleaning as usual.
• A little water may “spit” when mixed with steam. This is normal.
• Prior to using, we recommend that you test a floor surface area on an isolated floor area. If
uncertain, contact the floor manufacturer for specific floor care instructions and suitability
for steam cleaning.
HAND-HELD STEAMER
Use this detachable portable steamer on work surfaces, kitchen countertops, sinks, bathrooms,
windows, mirrors, tiles, and for spot cleaning on carpets and rugs. Use the attachments to
steam away dirt, grease and mold. Use the fabric cleaning attachment to remove wrinkles from
NOTE:
To remove
or replace
attachments, rotate
them
counter-clockwise
and pull out.
Illust.24
Illust.25
clothes, curtains, fabric upholsteries, and
more.
OPERATION:
1. First detach the Hand-Held Steamer (7)
from the main Mop Body (8) by lifting up
the lock. (Illust. 24)
2. Push the Hand-Held Steamer release tab
(12) upwards to remove it from the Mop
Body. (Illust. 25)
INSTALLATION OF THE SHORT JET NOZZLE ATTACHMENT (10)
Prior to installation, make sure the Hand-Held Steamer has been detached from the main Mop
Body.
1. Pull Adapter (23) out of Hand-Held Steamer body. (Illust. 26)
2. Turn the adapter away from the steamer opening to ensure it is open. (Illust. 27)
3. Align the Short Jet Nozzle Attachment (10) with the slots inside the opening. (Illust. 28)
4. Push the Short Jet Nozzle Attachment (10) into the opening until it reaches the end, then
turn clock-wise to lock it into place. (Illust. 29)
Illust.26
Illust.27
Illust.28
Illust.29
