Chapter 1: Overview
1-15
WPCM450R DDR2 Memory Interface
The WPCM450R supports a 16-bit DDR2 memory module with a speed of up
to 220 MHz. For best signal integrity, the WPCM450R provides point-to-point
connection.
WPCM450R PCI System Interface
The WPCM450R provides 32-bit, 33 MHz 3.3V PCI interface, which is compliant
with the PCI Local Bus Specification Rev. 2.3. The PCI system interface connects
to the onboard PCI Bridge used by the graphics controller.
Other Features Supported by the WPCM BMC Controller
The WPCM450R supports the following features:
•
IPMI 2.0
•
Serial over LAN
•
KVM over LAN
•
LAN Alerting-SNMP Trap
•
Event Log
•
X-Bus parallel interface for I/O expansion
•
Multiple ADC inputs, Analog and Digital Video outputs
•
SPI Flash Host BIOS and firmware bootstrap program supported
•
Reduced Media Independent Interface (RMII)
•
OS (Operating System) Independency
•
Provides remote Hardware Health Monitoring via IPMI. Key features
•
Provides Network Management Security via remote access/console redirection.
•
Supports the following Management tools: IPMIView, CLI (Command Line
Interface)
•
RMCP+ protocol supported
Note 1
: For BMC Configuration Instructions, please refer to the Embedded
BMC Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
