Chapter 4: AMI BIOS
4-17
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
Select Intel.to configure RAID settings using the Intel PCH controller. Select
LSI to configure RAID settings using the LSI controller. The options are
Intel
and LSI.
SATA RAID Option ROM/UEFI Driver (Available if the item above - SATA
Mode Select is set to AHCI or RAID)
Select Enabled to use the SATA RAID Option ROM/UEFI driver for system
boot. The options are
Enabled
and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are
Enabled
and Disabled.
SCU (System Configuration Unit) Configuration
Storage Control Unit
Select Enabled to support Intel PCH devices. The options are Disabled and
En-
abled
.
SATA RAID Option ROM/UEFI Driver
Select Enabled to use the SATA RAID Option ROM/UEFI driver for system boot.
The options are
Enabled
and Disabled.
SCU Devices
Select Enabled to enable support for PCH SCU (System Configuration Utility) de-
vices. The options are Disabled and
Enabled
.
SCU Ports 0~3
The status of each of the SCU ports indicated above will be displayed.
PCIe/PCI/PnP Configuration
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system using
a legacy device installed in a PCI slot. The options are UEFI Only and
Legacy Only
.
