Chapter 4: AMI BIOS
4-19
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer usin g a network device. The options are iSCSI and
PXE
.
Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1/LAN2 Option ROM. This is to boot
the computer using a network device. The default setting for LAN1 Option ROM is
Enabled
, and the default setting for LAN2 Option ROM is
Disabled
.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are
Onboard
and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and
Disabled
.
Super IO Configuration
Super IO Chip:
This item displays the Super IO chip used in the motherboard.
Serial Port Attribute
Use this feature to select the attribute for this serial port. The options are
COM/
SOL
(Serial On LAN), and BMC.
COM Configuration
Serial Port
Select Enabled to enable a serial port specified by the user. The options are
Enabled
and Disabled.
Device Settings
This item displays the settings of Serial Port 1 (COM).
Change Settings
This option specifies the base I/O port address and the Interrupt Request ad-
dress of Serial Port 1 (COM). Select
Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial
port becomes unavailable. The options are
Auto
, IO=3F8h; IRQ=4; IO=3F8h;
IRQ=3; IO=2F8h; IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3,
