Supero X9DRT-P, User Manual

Page: 39 / 111

Chapter 2: Installation
2-15
Populating RDIMM (ECC) Modules (in the E5-2600v2-based Systems)
Intel E5-2600(v2) Series Processor RDIMM Memory Support
Ranks
Per
DIMM
&
Data
Width
Memory Capacity
Per DIMM
(See the Note
Below)
Speed (MT/s) and Voltage Validated by Slot per Channel (SPC)
and DIMM Per Channel (DPC)
2 Slots Per Channel
1DPC 2DPC
1.35V 1.5V 1.35V 1.5V
SRx8 1GB 2GB 4GB 1 0 6 6 ,
1333
1066, 1333,
1600, 1866
1066,1333 1066, 1333, 1600
DRx8 2GB 4GB 8GB 1 0 6 6 ,
1333
1066, 1333,
1600, 1866
1066,1333 1066, 1333, 1600
SRx4 2GB 4GB 8GB 1 0 6 6 ,
1333
1066, 1333,
1600, 1866
1066,1333 1066, 1333, 1600
DRx4 4GB 8GB 16GB 1 0 6 6 ,
1333
1066, 1333,
1600, 1866
1066,1333 1066, 1333, 1600
QRx4 8GB 16GB 32GB 800 800, 1066 800 800
QRx8 4GB 8GB 16GB 800 800, 1066 800 800
Note: For detailed information on memory support and updates, please refer to the SMC Recommend-
ed Memory List posted on our website at http://www.supermicro.com/support/resources/mem.cfm.
Populating LRDIMM (ECC) Modules (in the E5-2600v2-based
Systems)
Intel E5-2600(v2) Series Processor LRDIMM Memory Support
Ranks
Per
DIMM
&
Data
Width
Memory
Capacity
Per DIMM
(See the Note
Below)
Speed (MT/s) and Voltage Validated by Slot per Channel (SPC) and DIMM
Per Channel (DPC)
2 Slots Per Channel
1DPC 2DPC
1.35V 1.5V 1.35V 1.5V
QRx4
(DDP)
16GB 32GB 1066,1333,1600 1066,1333,
1600,1866
1066,1333,1600 1066,1333,1600
8Rx4
(QDP)
32GB 64GB 1066 1066 1066 1066
Note: For detailed information on memory support and updates, please refer to the SMC Recommended
Memory List posted on our website at http://www.supermicro.com/support/resources/mem.cfm.
Other Important Notes and Restrictions
•
For the memory modules to work properly, please install DIMM modules of the
same type, same speed and same operating frequency on the motherboard.
Mixing of RDIMMs, UDIMMs or LRDIMMs is not allowed. Do not install both
ECC and Non-ECC memory modules on the same motherboard.
•
Using DDR3 DIMMs with different operating frequencies is not allowed. All chan-
nels in a system will run at the lowest common frequency.