4-28
X9DRT-P/-PT/-PIBQ/-PIBF Motherboard User’s Manual
IPMI Firmware Revision, IPMI Status
These items indicates your system IPMI firmware revision number and status.
System Event Log
SEL Components
Select Enabled for all system event logging at bootup. The options are
Enabled
and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No,
Yes, On next reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the
system event log is full. The options are
Do Nothing
and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are
Enabled
and Disabled.
Note
: After making changes on a setting, be sure to reboot the system for
the changes to take effect.
BMC Network Configuration
LAN Channel 1
: This feature allows the user to configure the settings for LAN1 Port.
IPMI LAN Selection
This feature displays the IPMI LAN Selection setting. The default setting is
Failover.
IPMI Network Link Status
This feature displays the IPMI Network Link status. The default setting is
Dedicated
LAN.
