Supero X8DTH-6 User Manual Download Page 73

Page: 73 / 97

Chapter 4: AMI BIOS

4-11



South Bridge Confi guration

USB Functions

This feature allows the user to decide the number of onboard USB ports to be

enabled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8

USB ports,

10 USB ports

and 12 USB ports.

USB 2.0 Controller (Available when the item: USB Functions is disabled)

This feature displays the current USB controller used in the motherboard.

Legacy USB Support

Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy

USB support will be automatically enabled if a legacy USB device is installed on

the motherboard. The settings are Disabled, Enabled and

Auto

Port60h/64h Emulation

Select Enabled to enable 60h/64h emulation for complete USB keyboard support

for operating systems that are not compatible with USB devices. The options

are Enabled and

Disabled.



IDE/SATA Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the IDE devices and displays the following items.

SATA#1 Confi guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode. Selecting

Enhanced sets SATA#1 to native SATA mode. The options are Disabled, Compat-

ible and

Enhanced.

Confi gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are

IDE,

RAID

and AHCI. (When the option-RAID is selected, the item-ICH RAID

Code Base will appear.)

ICH RAID Code Base (Available when the option-RAID is selected)

Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID

settings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure

Adaptec's SATA RAID settings. The options are

Intel

and Adaptec.

Summary of Contents for X8DTH-6


































































































Search results

Summary of Contents for X8DTH-6

Reviews:

Related manuals for X8DTH-6

Brands by name

Popular brands

Supero X8DTH-6, User Manual

Search results

Summary of Contents for X8DTH-6

Reviews:

Related manuals for X8DTH-6

Brands by name

Popular brands