Supero X8DTH-6, User Manual

Page: 82 / 97

4-20
X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual
WHEA Support
Select Enabled to enable Windows Hardware Error Architecture (WHEA) support
which will provide a common infrastructure for the system to handle hardware
errors on Windows platforms in order to reduce system crashes due to hardware
errors and to enhance system recovery and health monitoring. The default set-
ting is Enabled .

Trusted Computing (Available when a TPM device is
detected)
TCG/TPM (Trusted Platform Module) Support
Select Yes on this item and enable the TPM jumper on the motherboard to enable
TCG (TPM 1.1/1.2)/TPM support in order to improve data integrity and network
security. The options are No and Yes. If this feature is set to Yes, the following
items will display:
Indicate Physical
Select Yes for a TPM device to be detected by the system at each system boot.
The options are Yes and No .
TPM Deactivated
Select Set to activate a TPM device at bootup. Select Clear to deactivate a TPM
device. The options are Set, Clear and Don't Change .
TPM Owner
Select Enable Install to set up a TPM ownership. Select Clear to void a TPM
ownership. Select Disable Install to disable TPM ownership setup support. The
options are Don't Change , Enable Install, Disable Install and Clear.
Execute TPM Command
Select Enabled to allow the user to change executable TPM commands and TPM
settings. Select Don't Change to keep the current TPM settings. The options are
Don't Change , Enabled, and Disabled.
TPM Enable/Disable Status
This item displays the status of TPM Enabled/Disabled state.
TPM Owner Status
This item displays the status of TPM Ownership.