Supero X7DCT-3, User Manual

Page: 25 / 93

Chapter 2: Installation
2-3
Installing the LGA771 Processor
Press the load lever to release 1.
the load plate, which covers the
CPU socket, from its locking
position.
Gently lift the load lever to open 2.
the load plate.
Use your thumb and your index 3.
finger to hold the CPU at the
North Center Edge and the South
Center Edge of the CPU.
Load Lever
PnP Cap on
top of the
Load Plate
Load Plate
(with PnP Cap
attached)
2-3 Processor and Heatsink Fan Installation
Warning : When handling the processor package, avoid placing
direct pressure on the label area of the fan.
Notes:
Always connect the power cord last and always remove it before adding, 1.
removing or changing any components. Make sure that you install the pro-
cessor into the CPU socket before you install the CPU heatsink.
Intel's boxed Xeon CPU package contains the CPU fan and heatsink assem- 2.
bly. If you buy a CPU separately, make sure that you use only Intel-certifi ed
multi-directional heatsink and fan.
Make sure to install the motherboard into the chassis before you install the 3.
CPU heatsink and fan.
When purchasing a motherboard with an LGA 771 CPU Socket, make sure 4.
that the CPU plastic cap is in place, and none of the CPU Socket pins are
bent; otherwise, contact the retailer immediately.
Refer to the Chipset/MB Features Section for more details on CPU support. 5.
!