Supero X7DCT-3, User Manual

Page: 27 / 93

Chapter 2: Installation
2-5
Installing the Heatsink
CEK Passive Heatsink
Screw#1 Screw#2
Screw#1
Do not apply any thermal grease to the 1.
heatsink or the CPU die; the required
amount has already been applied.
Place the heatsink on top of the CPU 2.
so that the four mounting holes are
aligned with those on the retention
mechanism.
Screw in two diagonal screws (ie the #1 3.
and the #2 screws) until just snug (-do
not fully tighten the screws to avoid
possible damage to the CPU.)
Finish the installation by fully tightening 4.
all four screws.
CEK Heatsink Installation
Screw#2
Warning: We do not recommend that the CPU or the heatsink be
removed. However, if you do need to uninstall the heatsink, please
follow the instructions on the next page to uninstall the heatsink to
prevent damage done to the CPU or the CPU socket.
Removing the Heatsink
!