Supero SUPERSERVER 8027R-7RFT+, User Manual

Page: 13 / 131

Chapter 1: Introduction
1-3
Onboard Controllers/Ports
The color-coded I/O ports on the X9QRi-F+/X9QR7-TF+ include one COM port,
a VGA (monitor) port, fi ve USB 2.0 ports (four rear access I/O panel, 1x Type-A
connection), two gigabit/10-gigabit Ethernet ports and one dedicated IPMI LAN port.
Note 1: For more information on IPMI confi guration, please refer to the IPMI User's
Guide posted on our website at http://www.supermicro.com/support/manuals/
Graphics Controller
The X9QRi-F+/X9QR7-TF+ features an integrated Nuvoton (Winbond) BMC Video
Controller (Matrox MGA200).
Other Features
Other onboard features that promote system health include onboard voltage
monitors, auto-switching voltage regulators, chassis and CPU overheat sensors,
ACPI/ACPM power management, PECI (Platform Environment Confi guration
Interface) 2.0 support, AC power loss recovery, virus protection and BIOS rescue.
1-3 Server Chassis Features
The SuperServer 8027R-TRF+/7RFT+ is built upon the SC828TQ-R1K43LPB
chassis. Details on the chassis and on servicing procedures can be found in
Chapter 6. The following is a general outline of the main features of the chassis.
System Power
The SC828TQ-R1K43LPB chassis features a redundant 1400 Watt power supply
consisting of two power modules. The system does not need to be shut down when
replacing or removing a single power supply module.
Hard Drive Subsystem
The SC828TQ-R1K43LPB chassis was designed to support six hot-swap SATA
or SAS hard drives.
PCI Expansion Slots
Four PCI low-profi le expansion card slots are available in the rear of the chassis
for two (2) PCI Express 3.0 x16 slots (Slot3/Slot5) and two (2) PCI Express 3.0 x8
in x 16 slots (Slot2/Slot4). See our web site for details (http://www.supermicro.com/
products/nfo/UIO.cfm). See section 5-6 for further details.)