Supero SUPERSERVER 8027R-7RFT+, User Manual

Page: 121 / 131

7-26
SUPERSERVER 8027R-TRF+/7RFT+ USER'S MANUAL
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system
reboot. Select No to keep all system event logs after each system reboot. The
options are No, Yes, On next reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when
the system event log is full. The options are Do Nothing and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are Enabled and Disabled.
Note : After making changes on a setting, be sure to reboot the system for the
changes to take effect.

BMC Network Confi guration
LAN Channel 1/LAN Channel 2 :
This feature allows the user to confi gure the settings for LAN1/LAN 2 Ports.
Update IPMI LAN Confi guration
This feature allows the user to decide if the BIOS should confi gure the IPMI
setting at next system boot. The options are No and Yes. If the option is set
to Yes, any changes the user made to the IPMI settings will be applied at the
next system boot.
Confi guration Address Source
This feature allows the user to select the source of the IP address for this
computer. If Static is selected, you will need to know the IP address of this
computer and enter it to the system manually in the fi eld. If DHCP is selected,
the BIOS will search for a DHCP (Dynamic Host Confi guration Protocol) server
in the network that it is attached to and request the next available IP address for
this computer. The options for LAN 1 are DHCP and Static. The options for LAN
2 are Unspecifi ed , Static, DHCP, Dynamic-Loaded by BIOS, and Dynamic-BMC
running Other Protocol.