Supero SUPERSERVER 8027R-7RFT+, User Manual

Page: 113 / 131

7-18
SUPERSERVER 8027R-TRF+/7RFT+ USER'S MANUAL
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The
options are Normal and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for serial port 2. The options are SOL
(Serial On LAN), and COM.

Serial Port Console Redirection
COM 1/COM 2
These two submenus allow the user to configure the following Console
Redirection settings for a COM Port specifi ed by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM1 is Disabled ,
and for COM2 is Enabled .

Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for
Console Redirection. Select VT100 to use the ASCII Character set. Select
VT100+ to add color and function key support. Select ANSI to use the
Extended ASCII Character Set. Select VT-UTF8 to use UTF8 encoding to map
Unicode characters into one or more bytes. The options are ANSI, VT100,
VT100+ , and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer
and the client computer. A lower transmission speed may be required for long
and busy lines. The options are 9600, 19200, 38400, 57600 and 115200 (bits
per second).